Posted By: JMCFAN
Wiring Harness clean-up? - 10/25/11 11:13 PM
Dash wiring harness appears to be in good shape...but is flithy. Will definetly ohm out and test....but what is a good method to clean it up?
Simple green??
Posted By: astjp2
Re: Wiring Harness clean-up? - 10/26/11 12:50 AM
Simple green is corrosive.
Posted By: Anonymous
Re: Wiring Harness clean-up? - 10/26/11 01:52 AM
I used Goop and Gojo hand cleaner (the ones without grit).
They worked great on my harnesses in the '63 Dodge.
Posted By: Challenger 1
Re: Wiring Harness clean-up? - 10/26/11 01:16 PM
I used a pressure washer, worked great. I sprayed some degreaser on them first and laid them out in my driveway and blasted them clean. Then WD 40 them.
Posted By: rallye73
Re: Wiring Harness clean-up? - 10/27/11 02:40 AM
I washed my dash harness in the dishwasher. Worked pretty good too.
Posted By: cdp
Re: Wiring Harness clean-up? - 10/27/11 03:53 AM
Enamel reducer on a rag works well. Cleans them up instantly.
If you have paint on them, I've watched a buddy use spray stripper, then scrub with a cut down paint brush, then hoses it off many times. Followed by enamel reducer.
Did in on an original harness for a 429CJ Torino that went to Barrett Jackson.