Moparts
Chassis Black- primer?
Posted By:
JMCFAN
Chassis Black- primer? -
09/12/11
08:07 PM
Just had my K-member and Rear end housing vatted and sand blasted. Will be painting with Extreme Chassis black. Should I prime these pieces first? Expoxy primer ok?
Posted By:
OzHemi
Re: Chassis Black- primer? -
09/12/11
08:10 PM
I have used Extreme chassis black a bunch of times now, and just use it over bare steel.
Once it dries, it is like a rock
(over freshly sandblasted steel as well)
If you check the directions, it is not recommended to be used over primer from memory as it is
Posted By:
OzHemi
Re: Chassis Black- primer? -
09/12/11
08:17 PM
Here is how mine came out by the way...
Fresh after sandblasting:
Posted By:
OzHemi
Re: Chassis Black- primer? -
09/12/11
08:19 PM
And after drying (oh, and with the upper control arms on too..)
Once it cured for a couple days, it is extremely tough!
(and that is the extreme stuff right over the bare blasted metal)
Posted By:
JMCFAN
Re: Chassis Black- primer? -
09/12/11
08:29 PM
looks nice! I ordered the paint but will not have for a few days. Does it spray straight or do you thin?
No primer it is then. Thanks!
© 2024
Moparts Forums