Cuda window guides? See pic

Is one bent? Car is a 1972 Cuda. How and where do they mount? Thanks in advance

The one on the left certainly seems bent. As for position, one goes on under the weatherstrip, with the round end exposed, where the door glass makes the turn on top. You can see one at the curve in this picture on Doug Lepak's site (click to get full sized picture)...
http://www.stwheelz.com/Gallery/index.php/Steering-Wheels-in-Customers-Cars/BarrelCuda

Thanks I figured they were at the top front corner, could not recall. Does anyone repop them? I straightened the pinched one and may need to recoat it.

I knew they were avail, I just had to find the right description

http://rtspecialties.net/proddetail.asp?prod=6003257

http://www.megapartsusa.com/proddetail.asp?prod=132%2D6003257

they are just under the weatherstrip or there is a hard setting?

Can you rephrase that?

Yes,
In fact I don't have these clips on my challenger and I would like to know if these clips are only under the weatherstrip without screws to fix them on the top?

A window channel screw holds it in, so it's under the seal. If you can pull your seal down in the top front corner the install is a snap. So it's an anti rattle device