Moparts

Picture for 440-6 decal placement please

Posted By: TinCuda

Picture for 440-6 decal placement please - 08/30/11 11:13 AM

Does anyone have a photogragh of a factory correct placement of the 6 barrel and filter maint (little square) decals that go on the oval air cleaner lid? 1971 'Cuda 440-6.

Thanks,


.,
Posted By: ph23vo

Re: Picture for 440-6 decal placement please - 08/30/11 05:31 PM

here,s an original lid dan

Attached picture 6802257-ebag669(Large).jpg
Posted By: Morty426

Re: Picture for 440-6 decal placement please - 08/30/11 06:09 PM

Dan,

Would the lid be the same between Plymouth and Dodge?

M
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 08/30/11 08:38 PM

What year did the small do not wash in oil stickers go to blue and white

Larry
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 06:01 AM

Thanks for the picture.

I have seen alot of people put the filter decal below the wingnut. I see in your picture that it is between the six barrel decal and the second wingnut. I guess that the picture is correct for a non-shaker 440-6 motor?


.,
Posted By: shakerjoe

Re: Picture for 440-6 decal placement please - 08/31/11 03:26 PM

I don't think shakers got the 440-6 sticker, would be covered by shaker bubble, but af sticker would still be there for replacement reminder
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:18 PM

These are some pictures that I have gathered but I don't know if they are factory correct or not.

Plymouth 440-6

Attached picture 6803513-70_440-6_01.jpg
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:20 PM

Dodge 440 six pack.

Attached picture 6803518-70_440-6_06.jpg
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:22 PM

340 six pack.

Attached picture 6803520-70_340-6_04.jpg
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:34 PM

Reproduction air cleaner service instruction decal for 1972-1973 340, 1972-1974 360 and 400, and 1972-1974 440 except single snorkel air cleaner models.

Attached picture 6803540-dd358.jpg
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:35 PM

Reproduction air cleaner service instruction decal for 1972-1973 340 engines, 1972-1974 360/400 engines and 1971-1974 440 without dual snorkel air cleaner.

Attached picture 6803547-ac349l.jpg
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 08/31/11 04:38 PM

This is the one I am installing.

Attached picture 6803551-ac116.jpg
Posted By: Butterscotch71

Re: Picture for 440-6 decal placement please - 08/31/11 10:39 PM

71 cuda claimed to be a survivor (although the air cleaner lid looks too nice)

Attached picture 6803985-cuda_survivor_3.jpg
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 09/01/11 02:14 AM

Quote:

Reproduction air cleaner service instruction decal for 1972-1973 340, 1972-1974 360 and 400, and 1972-1974 440 except single snorkel air cleaner models.



So I need to find a blue and white sticker with the part number for a 6 pack filter for my car?

Larry
Posted By: cdp

Re: Picture for 440-6 decal placement please - 09/01/11 02:34 AM

Off 71-RR from the St. Louis plant.

Attached picture 6804350-aircleaner002.jpg
Posted By: LimeliteAero

Re: Picture for 440-6 decal placement please - 09/01/11 01:34 PM

Not to hijack but here goes....Does anyone make an accurate 440 SIX BARREL decal yet?
Posted By: WINGCARS_6970

Re: Picture for 440-6 decal placement please - 09/01/11 02:23 PM

I would think Dave Patik at PCG have the most correct decals.They use original parts to research.We brought him a lid with decal from a friends T/A Challenger
Posted By: floyd

Re: Picture for 440-6 decal placement please - 09/01/11 02:39 PM

Quote:

Not to hijack but here goes....Does anyone make an accurate 440 SIX BARREL decal yet?



Check with ECS. I know they did T/A air cleaner decals.
Posted By: floyd

Re: Picture for 440-6 decal placement please - 09/01/11 10:25 PM

How about this one? It's for an air cleaner that takes an oval air filter based on the "Parts filter-Part No. 2946186"

Attached picture 6805998-Decal1.jpg
Posted By: floyd

Re: Picture for 440-6 decal placement please - 09/01/11 10:28 PM

Part number

Attached picture 6806005-Decal2.jpg
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 09/02/11 12:09 AM

Quote:

How about this one? It's for an air cleaner that takes an oval air filter based on the "Parts filter-Part No. 2946186"



I knew that Galen had given me one of these years ago and I just went and found it. Same as the one in your pic.

Larry
Posted By: floyd

Re: Picture for 440-6 decal placement please - 09/02/11 02:22 AM

So what years is that for? It seems odd that they used the blue and white logo if its supposed to be for 1972. Why not the red/white/blue Mopar logo like on the other decals posted above?
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 09/02/11 09:41 PM

Quote:

So what years is that for? It seems odd that they used the blue and white logo if its supposed to be for 1972. Why not the red/white/blue Mopar logo like on the other decals posted above?



Thats a good question, I never noticed that before.

Larry
Posted By: yellow sixpack

Re: Picture for 440-6 decal placement please - 09/04/11 12:29 AM

1

Attached picture 6809436-045(2).JPG
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 09/04/11 03:49 AM

I wonder if I go find the pics and video of the Red 72 6 pack car at Slobes what it had. although it was a pilot car if I remember so it might be different. Although my Runner has 71 door panels on it so you never know on early cars.

Larry
Posted By: Moparlar

Re: Picture for 440-6 decal placement please - 09/07/11 01:43 PM

Quote:

How about this one? It's for an air cleaner that takes an oval air filter based on the "Parts filter-Part No. 2946186"



I just found the part number for this decal in 1 of my 72 parts books and is says for 440 3-2 barrel with fresh air. It is not in the later parts books but the later books also do not have 6 pack parts listed for 72 at all so that makes sense. So I guess it will be put on the car when it is restored.

Larry
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 09/08/11 08:24 PM

Unless anyone can prove other wise, I guess the decal goes under the six barrel decal and above the lower wingnut.

Like in this picture...



.,

Attached picture 6816879-6802257-ebag669(Large).jpg
Posted By: DPelletier

Re: Picture for 440-6 decal placement please - 09/09/11 01:06 AM

Quote:

Unless anyone can prove other wise, I guess the decal goes under the six barrel decal and above the lower wingnut.

Like in this picture...



.,



You can't go wrong with duplicating the pic; at least ONE car looks like it came that way!

Seriously, when I researched this question for my SB, I found survivor pics with the decals in different spots. It makes since that they weren't applied all by the same person at the same time so I imagine some variety should be expected.


Dave
Posted By: TinCuda

Re: Picture for 440-6 decal placement please - 09/09/11 01:51 AM

Quote:

Quote:

Unless anyone can prove other wise, I guess the decal goes under the six barrel decal and above the lower wingnut.

Like in this picture...



.,



You can't go wrong with duplicating the pic; at least ONE car looks like it came that way!

Seriously, when I researched this question for my SB, I found survivor pics with the decals in different spots. It makes since that they weren't applied all by the same person at the same time so I imagine some variety should be expected.


Dave



I know that I can get overly obsessive. (I just took about five minutes to make sure I spelled the word obsessive correctly. lol) I guess there must not have been a standard. I have seen an original AAR lid with the two decals (air filter maint. decal and freezing weather "plug intake" warning decal) completely off center and cocked a bit. It looked like some guy just slapped them on with a bad hang-over. Probably just real world assembly and not an obsessive restoration. lol


.,
Posted By: cdp

Re: Picture for 440-6 decal placement please - 09/09/11 11:59 PM

A12 lid with crooked decals.

I could be wrong, but I doubt a shaker car would have had the decal "440-6 barrel/6-pack".

Seems I've even seen 70-71 Hemis with nothing more than the element decals and no "Hemi" decal.

Attached picture 6818761-aircleaner001.jpg
© 2024 Moparts Forums