69 Coronet seat medallions

I got the repop seat medallions from PG Classic for my R/T,what I need or make is the retainers for them,I put them on the front seat just using Pal-nuts -in the seat cover,but they are not "pulled in" enough,can any of you guys help me out,not going to put the ones in the back seat yet till I know how it`s done,my seats were missing the originals.

Go to your local ACE hardware and pick up a piece of 1/4" white polypropolyne plastic.... drill 2 holes for the retainer pegs, than follow the contour of the medallion giving yourself an extra 1/2" all around and machine down 1/8" removing all the plastic material between the lines..... then just place the white plastic piece inside the seat push on the retainer tabs til the sunk-in effect starts to take place an your done.

Later, BUZZ

Thanks Buzz