Moparts

Challenger Trunk Floor Hole Location

Posted By: Mopar Mark

Challenger Trunk Floor Hole Location - 09/28/08 03:08 PM

I had to install a new trunk floor in my 70 Challenger. The other one was allready removed when I got the car, so I don't have anything to go by. Does anybody know the hole sizes and location of the body plugs and fuel filler tube.
Thanks in advance for any input.
Mark
Posted By: Challenger 1

Re: Challenger Trunk Floor Hole Location - 09/28/08 05:35 PM

That's a tough request, be tough to get all the measurements for you. The best I can do at this point is to provide a couple pictures of a orginal 74 trunk floor.

Posted By: cataclysm80

Re: Challenger Trunk Floor Hole Location - 09/28/08 05:44 PM

hmmm, I could also use the measurements for the hole where the fuel sending unit wiring goes through the trunk floor. Also 70 challenger.

Tav
Posted By: Snoopy

Re: Challenger Trunk Floor Hole Location - 09/28/08 05:52 PM

I don't know if this will help, but here is a picture of the hole layouts for a 70 Cuda.
If anyone has corrections for the layout, please post them.

Click on attachment for larger picture.

Attached picture 4715854-70CudaTrunkLayout.jpg
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 09/29/08 01:41 PM

Thanks, The Cuda chart seems to have a lot of the same holes as the challenger.
Posted By: gtx6970

Re: Challenger Trunk Floor Hole Location - 09/29/08 02:08 PM

As far as I know the only difference for cuda versus challenger is the fuel filler tube location
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 09/29/08 02:45 PM

I looked at the trunk floors in the Goodmark catalog and it looks like Cudas have 2 extra holes. It looks like the holes at Delta 1 are not on Challengers.
Posted By: Snoopy

Re: Challenger Trunk Floor Hole Location - 09/29/08 07:11 PM

Top and bottom view of a 71 NOS Cuda trunk floor.

Attached picture 4717904-71NOSCudaTrunkPanLg.jpg
Posted By: Morty426

Re: Challenger Trunk Floor Hole Location - 09/29/08 08:58 PM

Quote:

Top and bottom view of a 70 NOS Cuda trunk floor.



That's not a 70 trunk floor, it's late 71 and newer. 70 and early 71 have the shock holes on the top.
Posted By: Snoopy

Re: Challenger Trunk Floor Hole Location - 09/29/08 09:29 PM

Sorry, I was in the 70 mode when I typed the year. Nice catch.
At least the file name on the picture is correct.
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 09/29/08 10:59 PM

It's the same for the Challenger, isn't it? Holes for shocks on top?
Posted By: Morty426

Re: Challenger Trunk Floor Hole Location - 09/30/08 12:49 AM

Quote:

It's the same for the Challenger, isn't it? Holes for shocks on top?



Yes it is.

Do you still need a picture of a Challenger floor?
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 09/30/08 05:33 PM

If its not too much trouble, to see how the hole for the filler tube looks.
Thanks,
Mark
Posted By: Eric_70_Chally

Re: Challenger Trunk Floor Hole Location - 10/01/08 10:01 PM

If you look at the autometaldirect web site, they have a good pic of the 70 Chally trunk floor pan.

I can send a pic of my resto in progress but I took out everything in the trunk (the floor, soon to follow).


~e
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 10/01/08 10:50 PM

Thanks Eric, I'll check out the web site.
Posted By: Snoopy

Re: Challenger Trunk Floor Hole Location - 10/01/08 11:04 PM

This is from their website. I wish these were around when I did mine. Doing the holes was a pain. Not to mention having to weld the two halves together.

Attached picture 4723275-70ChallengerTrunkPan.jpg
Posted By: Eric_70_Chally

Re: Challenger Trunk Floor Hole Location - 10/02/08 12:10 AM

Since my floor pan is still intact and installed, I'll gladly clarify any measurements, if it'll help.

~e
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 10/02/08 03:58 PM

Snoopy, It is a pain, I had to weld mine together also. I put the trunk floor in before they had the one piece floor.
Posted By: Mopar Mark

Re: Challenger Trunk Floor Hole Location - 10/02/08 04:00 PM

Eric, I think I have what I need now, but thanks for offering.
Posted By: 340SIX

Re: Challenger Trunk Floor Hole Location - 11/08/08 10:50 PM

Quote:

This is from their website. I wish these were around when I did mine. Doing the holes was a pain. Not to mention having to weld the two halves together.

so if i but an AMD trunk floor it will came as this pic shows and all holes are 100% right? what about extentions? i have some older year one ones.
sorry for the high jack thread
© 2024 Moparts Forums