Auto shifter mount bolts

70 Superbee auto with console. What size are the bolts/screws that mount the shifter to the floor bracket?

Thanks

Lee

If you mean the round plate that the shifter rod runs through and attaches to the floor hump, mine were 3 - #10 sheet metal screws x 3/4". That was for a 72 B-body, not sure if 70 is the same.

Lee, I'm pretty sure they are the same as A-bodies. If you can wait a few days, I have to pull my console. I'll get you a size then. If I forget, bump this thread so I remember to post or PM me.

Thanks for the replys, I found out its a 10-24 thread.

Lee

10-24 is correct for the bezel... 1/4" x 20 for the shifter mount & #10 sheet metal for the body to shift bellcrank to body seal.