Posted By: Yesdogjr
Cuda MSD Question - 04/15/11 07:03 PM
Ok this may be a stupid question but I have to ask.
My motor is going back in this weekend and I choose to use an MSD Distributor and a MSD 6AL box.
My question is will I still need to hook up the original ballast and orange Controller or were those only used by the original distributor?
Thanks
Posted By: gtx6970
Re: Cuda MSD Question - 04/15/11 07:10 PM
No, With the MSD box, the origial ecu and ballast is no longer used.
I pulled the 2 connectors for the ballast ouf of the bulkhead conector, tied them as one and used it as my key on voltage for the MSD box.
Posted By: Yesdogjr
Re: Cuda MSD Question - 04/15/11 07:16 PM
Thanks!
I call it a controller but I guess I should really call it the Voltage regulator. Still same answer?
Posted By: gtx6970
Re: Cuda MSD Question - 04/16/11 03:01 PM
This is the charging system voltage regulator , and yes it stays as original.
Posted By: Yesdogjr
Re: Cuda MSD Question - 04/16/11 05:29 PM
Wow Thanks! Im glad I stopped by here before going to the shop. I was going to leave it off thanks again.
Posted By: mopar346
Re: Cuda MSD Question - 04/17/11 03:05 AM
This may help.
Sorry it didn't attach, anyway it was the instruction manual. PM me your e-mail address if you need it, I'll e-mail it to you.