Posted By: rayztoy
FUEL LINES & BRAKE LINES - 05/16/08 02:57 PM
Hi Guys,
Where can I source these items, as closest to OEM in fit and quality? Thanks.
Ray
Where can I source these items, as closest to OEM in fit and quality? Thanks.
Ray
Quote:
Alan,
Thanks for the advice. Now do they make both the brake and fuel lines?
Quote:
Alan,
Thanks for the advice. Now do they make both the brake and fuel lines?
Quote:
The right stuff doesn't seem to fit very good in my opinion.
Quote:
I really like FINE LINES...excellent quality and fit in my opinion
Quote:
Stainless looks great and last forever, but some people have problems with them sealing because they are so mouch harder than the brass blocks they screw into. If I use them, I usually "seat" them then back off the nut and seat them a couple times to "form" the brass into the line. OE steel is fine also, it just will not look as good as the stainlessin time and corrosion is a possibility. For a limited use driver or show car OE would be fine-if I were building a car to drive ALOT or it was going to be stored in less than idea conditions I would use the stainless. Also, I have had good luck with Inline tube & Fine Lines-The right stuff doesn't seem to fit very good in my opinion.
Quote:
I've got all new SS brake and fuel lines from Right Stuff Detailing. I'm happy with them.