Posted By: anlauto
T/A Fender lettering - 02/17/11 03:27 AM
Somebody must have the engineering drawing of the factory placement of the 340 six pack lettering on the fender of a T/A Challenger ? 
Care to Share ?
Care to Share ?
T/A Fender lettering
Posted By: jrwoodjoe
Re: T/A Fender lettering - 02/17/11 03:39 AM
Alan, do you have any of Robert Ganat's Mopar books? I think one of them has it in the Challenger T/A section. Also remember that they are side specific and the slant mimics the rear pillar.
This photo has the 340 sixpak decal correctly placed in regards to the correct slant.
This photo has the 340 sixpak decal correctly placed in regards to the correct slant.
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 05:30 AM
......
Posted By: TransAm Twins
Re: T/A Fender lettering - 02/17/11 02:16 PM
Quote:
......
Do you have the AAR version of this? Would make a nice set for reference.
Ken
Posted By: jeff968
Re: T/A Fender lettering - 02/17/11 03:35 PM
Quote:
Somebody must have the engineering drawing of the factory placement of the 340 six pack lettering on the fender of a T/A Challenger ?
Care to Share ?
Just please, make sure you have the correct decal on the correct side!!! They should be slanting forward on both sides. I can't stand seeing T/As where someone switched them and they are facing towards the rear. The sublime car in the thread has them right.
Good luck.
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 04:32 PM
Quote:Quote:
......
Do you have the AAR version of this? Would make a nice set for reference.
Ken
Yes Ken,....I have all the factory stripe drawings, including the ones that never made production....at work now, will post tonite
Mike
Posted By: anlauto
Re: T/A Fender lettering - 02/17/11 10:04 PM
I should have known 
....Today I opened up the stripe kit from 
PERFORMANCE CAR GRAPHICS and low and behold there was a copy of that engineering drawing included. Also, with each part marked left/right, etc...you would have to be an idiot to get them mixed up 
....Today I opened up the stripe kit from PERFORMANCE CAR GRAPHICS and low and behold there was a copy of that engineering drawing included. Also, with each part marked left/right, etc...you would have to be an idiot to get them mixed up
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:32 PM
Alan,.....incase you don't have the factory drawing for the T/A spoiler decal?,...I'll post it here for you as well as others..
I fiqured I do most of the popular requests,if we wait for Chrysler Historical to ever finish their website for the engineering drawings, all the cars left would be restored!
Mike
I fiqured I do most of the popular requests,if we wait for Chrysler Historical to ever finish their website for the engineering drawings, all the cars left would be restored!
Mike
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:33 PM
here's some others
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:33 PM
e2
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:34 PM
e3
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:35 PM
e4
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:35 PM
e5
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:36 PM
e6
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:36 PM
e7
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:37 PM
e8
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:37 PM
e9
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:38 PM
e10
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:39 PM
e11
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:39 PM
e12
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:40 PM
e13
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:40 PM
e14
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:41 PM
e15
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:42 PM
e16
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:42 PM
e17
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:43 PM
e18
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:43 PM
e19
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/17/11 10:44 PM
end
Posted By: rftroy
Re: T/A Fender lettering - 02/18/11 03:03 AM
Quote:
e19
This factory drawing has the slant facing backwards, not forwards.
Bob
Posted By: FJ5_Fish
Re: T/A Fender lettering - 02/18/11 03:34 AM
How do you figure?
Posted By: DAYCLONA
Re: T/A Fender lettering - 02/18/11 04:55 AM
Quote:Quote:
e19
This factory drawing has the slant facing backwards, not forwards.
Bob
Are you sure?
Posted By: idrivevintage
Re: T/A Fender lettering - 02/18/11 01:41 PM
Thanks Dayclona!!
That sure is good stuff to have, it'll help me out tremendously
Here's what I'll be working with once the paint goes on ours
If only I worked as quickly as A.G.A.R.
That sure is good stuff to have, it'll help me out tremendously
Here's what I'll be working with once the paint goes on ours
If only I worked as quickly as A.G.A.R.
Posted By: cataclysm80
Re: T/A Fender lettering - 02/18/11 04:41 PM
I have these already myself, but this comes up often enough, and since they're all here together, I nominate this thread for the tech archives. How do we get that accomplished?
P.S. If anyone has a photo of the Drivers Education door decal installed on a car or NOS, THATS the one I'd Love to see.
Tav
P.S. If anyone has a photo of the Drivers Education door decal installed on a car or NOS, THATS the one I'd Love to see.
Tav