69 1/2 lift off hood air cleaner????

Thats cool but has anyone purchased one of his air cleaner bases price is right but what about fit????
thanks for any help

I could use a T/A Challenger one...Any Reviews ? Price?

I was told $150 for a12 style base no drains etc.no bridges.{do you actually need the bridges?} the good old days just buy if no good throw it in the corner. : now adays

SO IS THAT ALL YOU GUYS GOT. no one else is making this item???????

It is NOS, used original, Ben's, fiberglass, or an old bath towel.

Actually, I think the bases are covered as far as sources and am not aware of any other steel repops. Not what you were hoping to hear but I think that's it.

Think his name is Steve Matthews and I've bought a couple of them for use on some clone projects I was working on over the years - Real good guy to deal with , and for fiberglass repops , they are as good as I have seen or used - hope that helps

There seems to be, believe it or not, quite a few halves of the bases, both the inside and the outside.
The halves aren't worth half of what a good part is so there's some potential to save yourself some $.
Run a wanted ad and see whats out there.
That guy in London probably has some.

Opps edit I should say there WERE both halves floating around.

I bought a baseplate from Steve a couple of years ago and was very happy with the product recieved. Mine was set up for a stagev hemi intake and has worked well for me. Here it is when first recieved.

And the finished product.

looks good did you add the drain tubes&bridges?
& how who where

The repop bases show up on ebay a lot. If you want fiberglass the company listed above is your best shot. I bought mine from them and cut out the base for my dual quads like scatpack did. The fiberglass is heavy duty and not flimsy at all. I didn't add drains yet, as I don't live where it rains very often, nor do I plan on driving my car in the rain.

I also do not drive my cars in rain but in scatpaks pic he is showing draines & I am wondering how he did it & where purchased it looks good. I am after the look factor not rain factor

my best mopar buddy lives in vegas gotta love the sun

also I am new to the 6pk stuff so whata ya mean by halves : sorry never had a 6pack air cleaner in my hand

Sorry I do not really have any better pictures of the hardware used for the drains but got everything from my local hardware store. Used some copper fittings found in the plumbing section and fabbed it up. I have an original 69.5 6bbl aircleaner and tried to duplicate it the best I could. I even set up the valve cover breather the same and the setup has worked well. I will be glassing in the bottom of my lift off hood this winter and have it seal to the aircleaner for a functional system. When you use the hemi stagev intakes there are not a lot of options for a factory looking aircleaner assembly. Steve is a great guy to deal with and can set you up with just about anything you need. Here is a couple of more pictures of my setup.

I also do not drive in the rain if possible but wanted the drains for a factory look. They work well as I have tested them when washing the car.

Last one!

no disrespect I was just making sure yours was the way to go. never dealt with you before
so unless I decide to purchase a sno bar or a used one u the man thanks for info.

oh yah is scatpaks one of your bases? looks good enough for a clone a12

Yes, the base on my setup is from Steve.

awesome thanks scatpk