organosol where?

Posted By: redwrydr

organosol where? - 09/30/10 04:57 AM

So the 70 Cuda arrived at the painter today...I have a pint of organosol...and he asked if the tail panel AND the tail lights get Organosol...since the lights currently do not have it...I don't know...does the whole tail panel including the lights get it? or do I paint the panel Organosol and the lights a smoother finish? Thanks.....

Posted By: gtx6970

Re: organosol where? - 09/30/10 12:41 PM

Quote:

does the whole tail panel including the lights get it?

excluding the chrome bezels obviously

Yes, as does the area behind the grille, and the top of the wiper cowl on some cars

Posted By: vcummins

Re: organosol where? - 09/30/10 01:40 PM

Quote:

Quote:

does the whole tail panel including the lights get it?

excluding the chrome bezels obviously

Yes, as does the area behind the grille, and the top of the wiper cowl on some cars

Low gloss black

Posted By: gtx6970

Re: organosol where? - 09/30/10 01:56 PM

Quote:

Low gloss black

Vance,,Where ?

I've seen the factory print calling out the organsol on the tail panel, wiper cowl and the radiator support. so it only makes sense( to me anyway) the tail light bezels would be the same finish

Posted By: Morty426

Re: organosol where? - 09/30/10 06:20 PM

I thought the radiator support and cowl (for 1970) were painted low gloss black

The tail panel and tail lamps on the 70 cuda should be organosol

Posted By: Snoopy

Re: organosol where? - 09/30/10 06:38 PM

Posted By: Snoopy

Re: organosol where? - 09/30/10 07:28 PM

Was the pinch weld painted black on non-convertibles as in the drawing?

Attached picture 6224937-18.jpg

Posted By: vcummins

Re: organosol where? - 09/30/10 09:10 PM

Quote:

So the 70 Cuda arrived at the painter today...I have a pint of organosol...and he asked if the tail panel AND the tail lights get Organosol...since the lights currently do not have it...I don't know...does the whole tail panel including the lights get it? or do I paint the panel Organosol and the lights a smoother finish? Thanks.....

Is this Cuda a AAR ?

Posted By: 70440+6bbl

Re: organosol where? - 09/30/10 10:03 PM

Quote:

Was the pinch weld painted black on non-convertibles as in the drawing?

Snoop- here is my old '70 V-code hardtop. It was blacked out

Posted By: redwrydr

Re: organosol where? - 10/01/10 04:48 AM

No it is a BS23N Cuda, not an AAR

Thanks....

Posted By: redwrydr

Re: organosol where? - 10/01/10 05:28 AM

Thanks much as usual, I am going to take the attachment to the painter, that was very helpful...appreciate the wealth of knowledge here!

Phyllis

Posted By: jrwoodjoe

Re: organosol where? - 10/01/10 05:52 AM

One thing I find interesting is the paint on the "A" pillar. I know that on Troy's T/A it did not go all the way up like it shows in the drawing. It was approximately 1/4 the way up from the bottom of the pillar. Would it vary from Challenger to Barracuda? Just curious.

Joe