Water Pump casting number cross reference

I have a new water pump with a casting number 2402921. I do know it's exactly the right dimensions as what is on the 70 Hemi engines. Anybody know what all the engines and years this pump came on originally?

Thanks for any help.

This is a list I found of all the casting numbers. Still needing to know.

http://www.gmb.net/html/catalog/2008/2008_WP_CastingNumbers.pdf

But all it does is refer me to this.
http://www.gmb.net/html/products/waterpumps/2008_WP_PictureBook01.pdf

68-71 BB/Hemi water pump. Both A/C & Non-A/C used the same casting number. 2843290 - 6 & 8 blade impellers.

The information states impellers of 6 and 8 with part number 2843290. I have one with 10. Is it specific to a certain motor?
Thanks

With A/C = 6 blades
W/O A/C = 8 blades
Hemi = blades

I haven't seen any stock 10 blades. There are a lot of rebuilds floating around, who knows what was installed on them.

Since the Hemi never came with A/C the '68 and earlier used the 8-vane pump and it was driven at near crankshaft speed; in '68 they changed the pullies to drive the pump and fan faster and at the same time the Hemi got the 6-vane A/C pump.

Here's a pic of the 10-vane iron impeller, some impellers were also plastic.

John,
Is that a 2843290 casting? If so, are you sure that the impeller is original to that pump housing?

Thought I would send pics of the part I have.
Bill

Here is another.

Here is a factory water pump rebuild kit for a 2843290 casting water pump. This one is for an A/C or Hemi car. All the original 2843290 casting pumps I have seen have a stamped steel impeller.

I suspect that the basic 2843290 casting would accept both the 6 and 8-vane impellers.

I don't know the casting number of the 10-vane, I just posted the pic to show that they were used.