Posted By: 70killerbee
Repop Chally T/A style hood - 09/12/10 03:46 PM
Does anyone out here know the name, number, or website of the person who is repopping the T/A, AAR style hoods to the OEM specs??
Thank you
Thank you
Repop Chally T/A style hood
Posted By: varunner
Re: Repop Chally T/A style hood - 09/12/10 06:46 PM
AAR fiberglass out of florida Tel: 321-638-0961
Posted By: Alaskan_TA
Re: Repop Chally T/A style hood - 09/12/10 07:08 PM
Closest to OEM;
Posted By: 70killerbee
Re: Repop Chally T/A style hood - 09/12/10 08:09 PM
Thank you Barry!!!!
Posted By: 340SIX
Re: Repop Chally T/A style hood - 09/15/10 01:51 AM
Quote:
Closest to OEM;
I will add he makes them just as they were with the scoop added so some filler needs to be done in that area.
The underside is just as the factory ones were, with a ruff look.
I was lucky to get one from a member here when he added a taller hood on his car.
It also is stronger and may not warp but I am not going to use springs just to be safe.....
Posted By: rftroy
Re: Repop Chally T/A style hood - 09/15/10 05:49 AM
Barry,
How are their windshield washers?
Bob
How are their windshield washers?
Bob
Posted By: Alaskan_TA
Re: Repop Chally T/A style hood - 09/15/10 06:00 AM
www.fpap.com for the windshield washers.
Posted By: jeff968
Re: Repop Chally T/A style hood - 09/15/10 01:54 PM
I have one of the AAR T/A hoods and despite the extra reinforcement built into the hinge area it is warping. Otherwise, it is a nice piece.
Posted By: PAINT IT BLACK
Re: Repop Chally T/A style hood - 09/15/10 05:14 PM
I don't think any of the hoods can guarantee no warping. the reinforcement is too far inward and the fender side edges of the hood are simply subject to warping by nature. No way around it.
Posted By: DAYCLONA
Re: Repop Chally T/A style hood - 09/15/10 11:27 PM
I don't think any of the hoods can guarantee no warping. the reinforcement is too far inward and the fender side edges of the hood are simply subject to warping by nature. No way around it.
I guess I"ve got one of the "good" hoods
,....my hood is a Fiberglass trends hood,...very nice accurate repro,....paid about $400 for it 32 years ago,....been on the car since, with springs,.....still haven't seen it bow
Mike
I guess I"ve got one of the "good" hoods
,....my hood is a Fiberglass trends hood,...very nice accurate repro,....paid about $400 for it 32 years ago,....been on the car since, with springs,.....still haven't seen it bowMike