Moparts

Challenger Brake clutch pedal install question

Posted By: road

Challenger Brake clutch pedal install question - 09/03/10 03:56 PM

Installing the brake - clutch pedals on a 73 challenger and have a question on attaching to the firewall. Are there any additional bolts used other than the 4 from the power booster? When I took it off (many any years ago) I put 4 bolts and nuts on the assembly where it attaches to the firewall. Service and parts manual appear to only use the booster bolts.

Thanks
Posted By: Topcat

Re: Challenger Brake clutch pedal install question - 09/03/10 04:46 PM

The support bracket located to the left also.

Attached picture 6175618-BrakePedalLinkage1.JPG
Posted By: Morty426

Re: Challenger Brake clutch pedal install question - 09/03/10 07:47 PM

Correct - there should also be the little support bracket for 4 speed cars.
Posted By: DAYCLONA

Re: Challenger Brake clutch pedal install question - 09/03/10 10:50 PM

Correct - there should also be the little support bracket for 4 speed cars.









The firewall brace

Attached picture 6176168-brace.JPG
Posted By: DAYCLONA

Re: Challenger Brake clutch pedal install question - 09/03/10 10:53 PM

This may help,.....the 2 holes you need to drill are just dimples now on your firewall, just drill the dimples to locate the 4 spd pedal bracket

Mike

Attached picture 6176172-firewall.jpg
© 2024 Moparts Forums