E Body transmission mount

I'm stumped. Who makes a correct transmission mount for a 71 Chally? The Anchor Industry mounts are incorrect, the steel they are constructed of is 1/8" and it shoudl be 3/16" thick. What other optiosn are there for a correct resto?

Astrobuf

i got my yellow "hemi" mount from tflitepattys on ebag,i dont know there actuall adress but you should be able to search for it.just mounted it last week,seems to be a very nice piece.its made of rubber,cost about a ten ballobas more than a scumacker poly mount.

I just ran a quick search on Ebaymotors for mopar rubber transmission mount xxx (xxx=340/440) and turned up what appears to be the correct item

http://cgi.ebay.com/ebaymotors/Mopar-NEW...=item4aa331186c

Regretably, the ebay mount is incorrect. The factory mount uses 3/16" steel to form the hat shape that the rubber is installed into. I believe the listed mount is made by Anchor Industries/Westar and is made of 1/8" steel. The top hole is also incorrect if memory serves.

I believe the correct way to do this is to rebuild the original mount with the Anchor Industries "insert", I am just not sure how to do this and afraid I'll damage the original mount in trying it without direction?

Help anyone?


Astrobuf

havent checked how thick the steel insert is on the mounts sold by tflitepatty,but the rubber has a pentastar on it and the word yellow?

Tflitepatty's looks to be correct. It looks and is described to be NOS. It is possibly a rebuilt item, the swaging of the steel mount sleeve looks a bit unfamiliar, though I've never seen a new "yellow" mount. In any event, I am looking for a standard part for a 340 Challenger.

Close!

Thanks

Astrobuf