Moparts
Challenger TA trunk floor
Posted By:
MoparABE
Challenger TA trunk floor -
07/25/08
08:15 PM
Would a TA or AAR still have these plates? I'd think the holes in the floor would not be drilled. Whats correct?
Posted By:
FY1TA
Re: Challenger TA trunk floor -
07/25/08
08:47 PM
No hanger brackets . It will have holes on the passenger side only . They should have seam sealer over them .
Posted By:
MoparABE
Re: Challenger TA trunk floor -
07/25/08
08:55 PM
Black seam sealer over paint or painted over?
Posted By:
FY1TA
Re: Challenger TA trunk floor -
07/25/08
09:09 PM
White sealer same as the rest of the trunk . Usually a blob over each hole then painted .
Posted By:
Alaskan_TA
Re: Challenger TA trunk floor -
07/25/08
09:14 PM
Some did have a single bracket installed & never used.
Most just have seam sealer over the holes.
Posted By:
cataclysm80
Re: Challenger TA trunk floor -
07/28/08
01:28 PM
Great info! I just love these obscure topics.
Tav
Posted By:
Troy
Re: Challenger TA trunk floor -
07/28/08
08:41 PM
My car had no plate and seam sealer over the holes. Real bad picture but that was the way it was..
Posted By:
1970mopar
Re: Challenger TA trunk floor -
07/29/08
10:05 PM
I'd need to look again,, but I believe my Original AAR has no holes either side.
© 2024
Moparts Forums