rotisserie question.

Just curious, how do you get the car up on a rotisserie and how to determine where the attachment points are?

Mine was a kit from US cartools its setup to come down to the car. I estimated a centerline through the body as to how much weight was in the roof to the floor, left to right is easy. Raise the car unlock the rotisserie and have a couple buddies for safety. Move the car an inch or two if it feels heavy at that point drop it down and adjust.It only took three adjustments and I could turn the car all the way around with a finger.If you add or subtract parts it changes. I use heavy steel saw horses to set the car on for adjustments.

Here is a pic, of course there are extentions to make it longer and I add wheels and plates to attach to the body

a) how much is a similar set up to yours
b) how heavy is that? Easy to move by yourself
c) does that break down even further for storage? Just wondering how much space it would take up when not in use.

Quote:

---

a) how much is a similar set up to yours
b) how heavy is that? Easy to move by yourself
c) does that break down even further for storage? Just wondering how much space it would take up when not in use.

---

---It breaks down at all the joints so its in about 3 foot sections so its easy to move and store.When my Runner is on it I can roll it around without any problem, as for cost look at the US Cartool site its under sponsors. There are alot of them out there do a google search!