Posted By: ramman5600
Carb mounting gasket - 07/17/08 09:03 PM
I am looking for the correct carb gasket for my 1970 Cuda 440-4 with stock intake and freshly restored Carter AVS 4740. Please lead me in the right direction or who might actually carry this part. I have tried local stores and they keep coming up with a gasket that is about 1/16" to 1/8" thick and I believe the correct one should be 1/4" to 5/16". Thanks
Chad
Posted By: ramman5600
Re: Carb mounting gasket - 07/17/08 09:19 PM
Yes. He is the one who restored the carb for me and told me that I need the thick gasket, but he didn't have the gasket and the source he thought about didn't carry it either. Thanks Chad
Posted By: Ludington1
Re: Carb mounting gasket - 07/17/08 09:33 PM
Holley makes this one in 1/3"
Summit - Holley 1/3" Gasket And I think Holley also makes a 1/4" gasket.
Darren
Posted By: ramman5600
Re: Carb mounting gasket - 07/18/08 01:46 AM
He is part of Roger Gibson restoration?
Posted By: 62maxwgn
Re: Carb mounting gasket - 07/18/08 01:51 AM
This what you're looking for?
Posted By: Anonymous
Re: Carb mounting gasket - 07/18/08 02:32 AM
Look into the Mr Gasket vibration isolator carb base gaskets. Check out their web site.
Posted By: ramman5600
Re: Carb mounting gasket - 07/18/08 02:39 AM
Looks a lot more like what I need than the local parts rookies have come up with. Is there a part number on that part? Thanks
Chad