Moparts

Challenger picture needed.

Posted By: mopar 394

Challenger picture needed. - 11/27/09 03:28 PM

Can someone show me a picture of the trunk corners where the dutchman panel and the quarter meet? I need to see the transition between the two and how far the groove in the quarter goes into the corner. This would be for a 70 Challenger. Here is a picture of mine that's had work done. Thanks in advance, Todd

Attached picture 5630253-100_1979.jpg
Posted By: v269

Re: Challenger picture needed. - 11/27/09 04:28 PM

don't know if it shows enough but here is what i have

Attached picture 5630342-100_2628.JPG
Posted By: mopar 394

Re: Challenger picture needed. - 11/27/09 04:43 PM

Wow, nice paint job. Does anyone have any closer up?
Posted By: burdar

Re: Challenger picture needed. - 11/27/09 05:05 PM



This is a 73 with a vynal top. I think you wanted the trunk view though. This was taken from the glass, back.
Posted By: jrwoodjoe

Re: Challenger picture needed. - 11/27/09 06:19 PM

Here are some pics of my 70 Challenger. Car has been blasted and primed.

PS, don't duplicate the funny shaped holes. That's part of the Rear Utility System for the Trunk...aka RUST.

Left side:

Attached picture 5630491-DSCF0039.JPG
Posted By: jrwoodjoe

Re: Challenger picture needed. - 11/27/09 06:20 PM

Right side:

Attached picture 5630492-DSCF0040.JPG
Posted By: mopar 394

Re: Challenger picture needed. - 11/27/09 07:32 PM

Thanks for the pictures, that answers my questions.
© 2024 Moparts Forums