Posted By: 68_661charger
Separating inner/ outer wheel houses? - 10/11/09 05:06 PM
Are the inners/ outers seam welded together like a gas tank? If so is grinding the outer wheel house flange the best way to remove the outer?
Posted By: Challenger 1
Re: Separating inner/ outer wheel houses? - 10/11/09 05:15 PM
Drilling out the spot welds is the best way.
Posted By: 1_WILD_RT
Re: Separating inner/ outer wheel houses? - 10/11/09 05:17 PM
They are spot welded on the flange with a sealer between the panels.. I've used an air chisel with a flat blade with good results..