Moparts

1969 dodge dart brake proportioning valve.

Posted By: IEAT4DS

1969 dodge dart brake proportioning valve. - 07/10/08 02:49 AM

Does anyone have a picture of one? I did't take the car apart so I don't know what it look's like or where it is mounted. How about where to buy one? Thank!!! Scott The car is a GTS,340,four speed, front disk, 10"rear drum, manual brakes
Posted By: 340Scamp

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 02:55 AM

This is on my dad's '69 340 GTS with disc brakes.

Attached picture 4541945-DSC04269.JPG
Posted By: IEAT4DS

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 03:01 AM

Thanks for the picture. It is awesome. Where is that located? Thanks Again!!!
Posted By: 340Scamp

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 03:05 AM

another

Attached picture 4541981-DSC04927.JPG
Posted By: IEAT4DS

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 03:20 AM

Perfect. You are the best!!! That looks like a F8 green Dart. Green Rules!!!
Posted By: 340Scamp

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 03:27 AM

Yea, He's almost got it finished.

Attached picture 4542050-DSC04904.JPG
Posted By: IEAT4DS

Re: 1969 dodge dart brake proportioning valve. - 07/10/08 05:09 AM

Does anyone have an extra one to sell or know where to buy a new one? For some reason I can't post on parts wanted. Thanks!! Scott
Posted By: gerty

Re: 1969 dodge dart brake proportioning valve. - 07/11/08 11:44 AM

Pm sent
Posted By: broncobra

Re: 1969 dodge dart brake proportioning valve. - 07/12/08 08:42 AM

Quote:

Does anyone have an extra one to sell or know where to buy a new one? For some reason I can't post on parts wanted. Thanks!! Scott

Inline tube carries brand new Mopar ones.
Posted By: RoadRunnerJD

Re: 1969 dodge dart brake proportioning valve. - 07/14/08 12:48 AM

If you have disc brakes on the front, there is a proportioning valve between the brake line distribution block and the rear end. It is different than the photo shown and is called the proportioning valve. It mounts to the frame just where it starts to go under the front floorboard.
Posted By: GODSCOUNTRY340

Re: 1969 dodge dart brake proportioning valve. - 07/14/08 09:43 PM

Right, Here's a pic of that valve.

Attached picture 4550981-DSC04267.JPG
Posted By: RoadRunnerJD

Re: 1969 dodge dart brake proportioning valve. - 07/14/08 11:24 PM

I forgot about the bracket for it? Does anyone repro the bracket (box)?
Posted By: IEAT4DS

Re: 1969 dodge dart brake proportioning valve. - 07/15/08 02:17 AM

Thanks for all the info. I went to(Inline Tubes)web site. They said both the valves were used on a- bodies. They also make brackets for the Texas shaped valve. I wonder which valve they chose to use on my car? Thank You!!! Scott
Posted By: JohnRR

Re: 1969 dodge dart brake proportioning valve. - 07/15/08 03:32 PM

Quote:

Thanks for all the info. I went to(Inline Tubes)web site. They said both the valves were used on a- bodies. They also make brackets for the Texas shaped valve. I wonder which valve they chose to use on my car? Thank You!!! Scott



Why the ? The factory used both valves with disc brakes , the first picture is of a distribution block , no valving , the second is the proportioning valve .

The 71-72 A bodies with KH 4 piston had a combination distribution block proportioning valve (???) , I bought one over the weekend at Carlisle from Fine Lines , it eliminates the 2 piece rear line. I'm going to be trying it in a car I'm working on for a friend first and see how it works . I also have the valve from my dads 72 duster that I parted years ago to see if its the same piece ???
Posted By: IEAT4DS

Re: 1969 dodge dart brake proportioning valve. - 07/15/08 07:41 PM

Thanks Johnrr for clearing things up. I am a slow learner.Inline tube carries both the combination distribution/ proportioning valve and the two seperate piece set up (Part #blk245). I want the setup to be factory correct.I am going with your advice. I will be completing the brakes as soon as my parts come. The little green guy I posted looked like he was looking up at all the info for reference thats why I used him.
© 2024 Moparts Forums