68 Barracuda SS aluminum seat brackets?

Anyone else other than kramer make the aluminum seat brackets for the barracuda SS ?

I don't believe so. Every now and then a set pops up on Ebay but they still carry a healthy price.

Yah $385 sounds like alot but if they are the only ones making them they can charge what they want

Post deleted by moparphillie

are you sure there the same??? I could be wrong but I thought there different between the two.

Troy,
You are correct... My mistake as I misread Kramer's Catalog. I just spoke to Cindy at Kramers. While the seat brackets look exactly the same, the 1965 seat brackets are two ( 2 ) different heights due to the 1965 floor designs while the 1968 seat brackets are all the same height since the 1968 cars have a flat floor design. Please disregard my previous post as I just deleted it.
Sorry

I just found this....these are 1968 A body...

...and these are 1964 and 65...

I have all of the dimensions (for 62-65) and was going to start repopping them and even had 2-3 outlets lined up for distribution.

Life intervened and I haven't been able to get back to the project. Lets just say they weren't going to go for the $385 and I planned on both aluminum and more economical painted/powdercoated steel versions.

Troy are you selling those 68 style brackets ?

Yo0u can build them yourself for about $35. get the ref. guide, get some scrap alum & follow the blueprints.

Where do you get the reference guide at ? I have the book building a SS but no blueprints in it...

Supercar collectibles.com. "Authenticity guide 1968 Dart & Barracuda Hemi Superstock" by Jim Schild. pg.44

Very good book. There is a lot of good info in it.

The seat bracket are also being sold on Ebay under the store name HemiEddy.

Thanks I'll try to pick up that book.

Look at what I found!!

http://ssandafx.com/prod.html

Sweet they must of just put those on there.