Hood mounted turn signals for 70 RR

Can anyone tell me how I can repair my turn signals that mount in the hood? I tried to change the light bulbs in them and one of the sockets was froze solid and I had to break it to get it out. I can buy the new wire harness but I'm not sure how to mount it back in the fixture. Any advice would be appreciated! If I can't fix them is there some place where I can buy new signals?

New ones are available from www.beaparts.com

Stock # 252-RR70, pair w/wires.
And sometimes found on ebagger for
even less..

Thanks for the info! Kind of pricy but if you need them you need them!!

Glad you could find them Bill, I didn't know where to get them either..... Nick

I received a catalog awhile back from Krusin Moons www.Krusinmoons.com that has everything you could possibly need for replacement parts for all types of Mopar fender mounted turn signals. Their email address is Krznmoon@Atlanticbb.net Their address is Dennis J. Mullen 313 Congress Avenue Johnstown PA 15905 Their phone is 814-255-7993.

Quote:

---

Thanks for the info! Kind of pricy but if you need them you need them!!

---

Bill..
They do come with leads and bulbs,and are nicely finished. Also a #330 bulb is used and these are available through a good electronic supply house. A box of 10 costs what some are asking for just 1 or 2.

Also as we speak there is a pair of originals on E-bagger.

http://cgi.ebay.com/ebaymotors/1970-70-R...sspagenameZWDVW


Just my ..