Posted By: DanMcG
I could use some dash VIN pic's - 07/08/08 12:40 AM
I need to locate the chrysler logo decal on my vin and I would like to see where it's suppose to go. All my pic's were lost in a puter crash. If it matters, it's a 68 road runner.
Thanks in advance, Dan
Posted By: 68jim
Re: I could use some dash VIN pic's - 07/08/08 01:09 AM
68 Road Runner...good luck with the decal.
Jim
Posted By: DanMcG
Re: I could use some dash VIN pic's - 07/08/08 01:15 AM
Thanks guys, thats just what I needed.
Dan
Posted By: A12
Re: I could use some dash VIN pic's - 07/08/08 01:33 AM
Another '68 hemi RR.....looks like the Pentastar is centered on the engine code character on these samples
Posted By: MrNormsTA
Re: I could use some dash VIN pic's - 07/08/08 03:30 AM
Don't mess up, you only got one shot.
Rick.
Posted By: 71rm23
Re: I could use some dash VIN pic's - 07/08/08 03:35 AM
Where can I get one of those decals?
Posted By: DanMcG
Re: I could use some dash VIN pic's - 07/08/08 01:30 PM
Not sure whats correct but I painted my dash and VIN with SEM trim black 39143...I think it looks good.
Posted By: 2abodymcodes
Re: I could use some dash VIN pic's - 07/10/08 12:38 AM
i have 2 69 roadrunners. why is the vin tag on one black with a white decal and the other is bare steel with a black decal ?? this is the black vin with the white decal.
Posted By: 2abodymcodes
Re: I could use some dash VIN pic's - 07/10/08 12:39 AM
this is the bare steel with the black decal
Posted By: 2abodymcodes
Re: I could use some dash VIN pic's - 07/10/08 12:40 AM
better pic of the black one
Posted By: DanMcG
Re: I could use some dash VIN pic's - 07/10/08 12:53 AM
Good question I thought they were all black.
I thought the decal I got from Rick was grey, but after looking at it again it's closer to black, which won't work to good on my black VIN.
Posted By: 2abodymcodes
Re: I could use some dash VIN pic's - 07/10/08 01:01 AM
the bare steel with black decal is an original unrestored but very rusty ohio car. if you look very close you can tell it never had black paint on it and the decal is originaly black.
Posted By: DanMcG
Re: I could use some dash VIN pic's - 07/10/08 01:24 AM
A12's bare metal one has the pentastar alittle to the left compared to all the others.
Posted By: RobX4406
Re: I could use some dash VIN pic's - 07/10/08 08:22 PM
Since he asked "how to apply" the sticker, anybody have any help to provide.
Maybe some helpful pointers on lining it up or techniques?
Bumping to help a guy out.
Posted By: macmic87
Re: I could use some dash VIN pic's - 07/14/08 11:23 PM
attached decal to the end of a paint stick with a small piece of tape. placed it carefully and looked at it through the window before i gave it the final press to make it stick to the vin tag. i was nervous but it did work and looks great. this was done to the tag installed in the car. once it was stuck, i removed the paint stick, rubbed it good and carefully pulled off the backing.
Posted By: DanMcG
Re: I could use some dash VIN pic's - 07/15/08 12:38 AM
Thanks for the reply! I assumed it just stuck on with some pressure, but you know what happens when you assume.
Dan
Posted By: JERICOGTX
Re: I could use some dash VIN pic's - 07/15/08 04:22 PM
My Road Runner had a black VIN with white/grey lettering. After sitting out in the elements for 20 years without a windshield the tag went to bare metal with black lettering.
Where can you get the decals again?
Jeff
but I find it hard to believe that there were unpainted and painted VIN tags with different color VIN stickers used at the same plant, no less....