Moparts

Repro E body rear sway bar end Link ?

Posted By: scatcity

Repro E body rear sway bar end Link ? - 09/10/09 12:02 PM

Any-one use the "new" repro rear end links yet? Thoughts, comments, etc... Good source to obtain them from?
Posted By: 340SIX

Re: Repro E body rear sway bar end Link ? - 09/10/09 03:19 PM

Quote:

Any-one use the "new" repro rear end links yet? Thoughts, comments, etc... Good source to obtain them from?



Yes my PST whole front end kit came with them. I used them but was just a long threaded rod and was to long so I cut them off shorter once on the car.
I will put the old ones back on after they get plated one day.
Fit and funtion ok just look after market
Posted By: Challenger 1

Re: Repro E body rear sway bar end Link ? - 09/10/09 03:20 PM

Firm Feel makes the best one that I know about. I would think they would have the ends.
Posted By: gtx6970

Re: Repro E body rear sway bar end Link ? - 09/10/09 03:27 PM

E-body rears are a double ended stud


E-body fronts are a long bolt with a inner sleeve
Posted By: scatcity

Re: Repro E body rear sway bar end Link ? - 09/10/09 05:39 PM

Those pictured in the top photo, the rear ones are the ones I'm asking about. Any-one here sell these, or advise a reputable vendor who does.??
Posted By: RedFish

Re: Repro E body rear sway bar end Link ? - 09/10/09 05:44 PM

Look at the link above
Posted By: rayztoy

Re: Repro E body rear sway bar end Link ? - 09/10/09 05:48 PM

Quote:

Look at the link above



www.amhightechauto.com
Bill will take good care of you!!
Posted By: scatcity

Re: Repro E body rear sway bar end Link ? - 09/10/09 05:56 PM

OK then......
Posted By: 2fast4yourBrain

Re: Repro E body rear sway bar end Link ? - 09/11/09 01:59 PM

Interesting that the '66-69 B/A-body FRONTS are interchangeable w/the E-body rears.



links on ebag
© 2024 Moparts Forums