Posted By: Powershack
69 Dana Pinion snubber - 08/27/09 03:05 PM
Anybody out there have any photos of an original pinion snubber for a Dana rear. 69 Dana rear off of a Super Bee. Thanks!
Posted By: badblack68
Re: 69 Dana Pinion snubber - 08/28/09 04:21 AM
Posted By: DoctorDiff
Re: 69 Dana Pinion snubber - 08/28/09 03:39 PM
That is the first generation, '66-'68 style.
'69-'72 are more pointed toward the front.
Posted By: rayztoy
Re: 69 Dana Pinion snubber - 08/28/09 05:16 PM
Posted By: Snoopy
Re: 69 Dana Pinion snubber - 08/28/09 05:25 PM
Comparison
What are the year ranges for each?
Posted By: Snoopy
Re: 69 Dana Pinion snubber - 08/28/09 05:35 PM
This is a 70 Dana pinion snubber.
Posted By: rayztoy
Re: 69 Dana Pinion snubber - 08/28/09 06:36 PM
Hi Snoopy!
That is what I have on my 70 Cuda 440. Is that applicable for 69 and 71?
Posted By: Snoopy
Re: 69 Dana Pinion snubber - 08/28/09 07:00 PM
The 67-69 Factory Parts Books list P/N 2539971
The 70-71 Factory Parts Book list P/N 3400570
72 B-Body only up until June 72 P/N 3400570
Posted By: DoctorDiff
Re: 69 Dana Pinion snubber - 08/28/09 07:51 PM
Yes, the original snubber pictured is correct for 1969-72 passenger cars.
I suppose the first generation snubber may be found on some early '69 models, but I have never seen one on any original '69 vehicle or on any of the '69 Dana rears I have ever bought or rebuilt.
I also stock those same repro Dana 60 pinion snubbers.
E-mail me if you are interested.