Posted By: jrwoodjoe
Tail light housing red stud protectors question. - 08/18/09 10:58 PM
Only used on Plymouths...not dodges...correct?
Tail light housing red stud protectors question.
Posted By: cataclysm80
Re: Tail light housing red stud protectors question. - 08/18/09 11:18 PM
Good question Joe. 
Tav
Tav
Posted By: gtx6970
Re: Tail light housing red stud protectors question. - 08/18/09 11:28 PM
Quote:
Only used on Plymouths...not dodges...correct?
afaik, Yes
BUT, I did find ONE in the trunk of my 1970 challenger
Posted By: Dixie
Re: Tail light housing red stud protectors question. - 08/19/09 01:31 AM
Quote:Quote:
Only used on Plymouths...not dodges...correct?
afaik, Yes
BUT, I did find ONE in the trunk of my 1970 challenger
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 08/19/09 06:08 PM
What year E-Bodies used these?
Posted By: gtx6970
Re: Tail light housing red stud protectors question. - 08/19/09 06:32 PM
Quote:
What year E-Bodies used these?
on the tail light? , none that I'm aware of
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 08/19/09 06:36 PM
Bill
Where were they used, besides the side marker lights?
Do you have the correct hardware for a 70 Cuda tail light installation?
I found these on your website, P/N SC3165, but couldn't find the nuts or wire retainers. Are the these parts available?
Where were they used, besides the side marker lights?
Do you have the correct hardware for a 70 Cuda tail light installation?
I found these on your website, P/N SC3165, but couldn't find the nuts or wire retainers. Are the these parts available?
Posted By: rayztoy
Re: Tail light housing red stud protectors question. - 08/20/09 01:10 AM
Quote:
What year E-Bodies used these?
I believe they were used on the side markers, 70-71 and tailights for 72-74.
Posted By: rayztoy
Re: Tail light housing red stud protectors question. - 08/20/09 01:24 AM
Snoopy,
Check out this link. http://cgi.ebay.com/ebaymotors/70-71-Cud...sQ5fAccessories
Check out this link. http://cgi.ebay.com/ebaymotors/70-71-Cud...sQ5fAccessories
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 08/20/09 04:39 AM
Rayztoy,
Thanks for the link.
Thanks for the link.
Posted By: FY1TA
Re: Tail light housing red stud protectors question. - 08/20/09 11:49 AM
Quote:
Snoopy,
Check out this link. http://cgi.ebay.com/ebaymotors/70-71-Cud...sQ5fAccessories
Those aren't right either . The originals have nut with a washer that spins .
Posted By: gtx6970
Re: Tail light housing red stud protectors question. - 08/20/09 12:06 PM
Quote:
Those aren't right either . The originals have nut with a washer that spins .
Only ones I ever seen on a cuda ? Challengers are different style nut
Posted By: rayztoy
Re: Tail light housing red stud protectors question. - 08/20/09 12:49 PM
Those aren't right either . The originals have nut with a washer that spins .
FY1TA, you are correct! Sorry for the incorrect info Snoopy. I just looked at my original 70 Cuda(SPD 3/21/70)tailight nuts and they are a nut with a spinning washer.
They LOOK identical to the nuts that secures the plate in the trunk for the muffler s-clamp(exhaust hanger tall nut).
FY1TA, you are correct! Sorry for the incorrect info Snoopy. I just looked at my original 70 Cuda(SPD 3/21/70)tailight nuts and they are a nut with a spinning washer.
They LOOK identical to the nuts that secures the plate in the trunk for the muffler s-clamp(exhaust hanger tall nut).
Posted By: rayztoy
Re: Tail light housing red stud protectors question. - 08/20/09 12:58 PM
They LOOK like these, but not black, and size is different 
Posted By: cataclysm80
Re: Tail light housing red stud protectors question. - 08/20/09 01:31 PM
Quote:
Only ones I ever seen on a cuda ? Challengers are different style nut
Hi Bill, Do you have the Challenger style available?
Tav
Posted By: gtx6970
Re: Tail light housing red stud protectors question. - 08/20/09 02:46 PM
Just so theres no confusion, the exhaust hangers are 1/4 -20 thread
the tail light nuts are 10-24 thread
back ordered till late Oct 09
these , but should be yellow zinc di-chromate -
ps- I have a few dozen of the nuts as shown in dull clear zinc. replacements in yellow zinc (as they were on my 1970 challenger) will not be avail until late this year to early winter .
the tail light nuts are 10-24 thread
Quote:Quote:
Only ones I ever seen on a cuda ? Challengers are different style nut
Hi Bill, Do you have the Challenger style available?
Tav
back ordered till late Oct 09
these , but should be yellow zinc di-chromate -
ps- I have a few dozen of the nuts as shown in dull clear zinc. replacements in yellow zinc (as they were on my 1970 challenger) will not be avail until late this year to early winter .
Posted By: rayztoy
Re: Tail light housing red stud protectors question. - 08/20/09 03:33 PM
Bill,
That's EXACTLY what my tailight nuts look like. Thanks for giving the correct size info.
That's EXACTLY what my tailight nuts look like. Thanks for giving the correct size info.
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 09/06/09 12:19 AM
I just found my 70 Cuda taillights, moving sucks, and here is a picture of the original nuts. A06 SPD & Hamtramck build.
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 09/06/09 12:20 AM
Passenger side taillight bucket.
Posted By: screamindriver
Re: Tail light housing red stud protectors question. - 09/06/09 02:06 PM
My 70 has those also...Earlier SPD{9-11-69)..at Hamtramck 
Posted By: lemondana
Re: Tail light housing red stud protectors question. - 09/07/09 01:44 AM
I had a 69 Barracuda parts car that had the red protectors. Still have them someplace I think.
Posted By: Snoopy
Re: Tail light housing red stud protectors question. - 09/07/09 01:53 AM
Early 70 Cuda - Hamtramck. ?
Left: Taillight nuts.
Right: Side-marker nuts.
Left: Taillight nuts.
Right: Side-marker nuts.
Posted By: 70440+6bbl
Re: Tail light housing red stud protectors question. - 09/08/09 12:09 AM
These are on a B05 '70 'Cuda from Hamtramck.
Posted By: 70440+6bbl
Re: Tail light housing red stud protectors question. - 09/08/09 12:17 AM
'70 'Cuda A12 SPD (Oct.12, 69)
