Posted By: fluegelmeister
70 RR 26" Radiator Support - 07/01/08 12:53 AM
Hi,
Could someone measure a 26" radiator for a 70 Road Runner and tell me the center to center dimension between the upper mounting bolts. Just need to verify the dimensions.
Thanks,
Barry
Posted By: mickm
Re: 70 RR 26" Radiator Support - 07/04/08 04:46 PM
would like to help, but i'm not stock. put a repop right hand support in, and then had to move the nuts in the left hand support over by about 5/8", so i couldn't be sure how accurate it is. but the radiator fits! and we measured off of a stock car in the shop to get it where it is, so i guess it would be!! will try to get to it today, or at least this gets you a bump...
Posted By: daytonakid
Re: 70 RR 26" Radiator Support - 07/04/08 05:43 PM
I measured two cars looks like 28 to 28 1/4. The radiator mounting holes are sloted. Hope that helps. Bill
Posted By: fluegelmeister
Re: 70 RR 26" Radiator Support - 07/05/08 03:09 AM
Thanks, Thats what I have too.
Posted By: Anonymous
Re: 70 RR 26" Radiator Support - 07/05/08 02:39 PM
Quote:
Hi,
Could someone measure a 26" radiator for a 70 Road Runner and tell me the center to center dimension between the upper mounting bolts. Just need to verify the dimensions.
Thanks,
Barry
Don't take this wrong but if you have the original core support,you already have the answer.
Posted By: fluegelmeister
Re: 70 RR 26" Radiator Support - 07/05/08 05:04 PM
That's not the original radiator support. The left side was replaced.