Moparts

ebody gurus 70-71 Cuda Front Bumper Bracket PN Question

Posted By: stat5

ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 08/02/09 03:51 PM

I took these bumper brackets on off a cuda front RUBBER bumper that I had and they had 2962448-9 stamped on the outer brackets.

In checking the 70-71 parts books I see that for the outer brackets 2962284-5 are for standard chrome bumpers and 2962446-7 are for the rubber bumpers.

So the question what exactly are the 2962448-9 part number brackets that I have for? Visually they look like and match up with cuda bumper brackets so its pretty obvious that is what are they for, so what is the application? Chrome Bumpers? Rubber Bumpers?

Thanks
Posted By: cataclysm80

Re: ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 08/02/09 06:21 PM

All chrome brackets have the third last digit as a two, all elastomeric bumper brackets have the third last digit as a four. The first four digits are the same for all brackets.

Numbers on bumper brackets with colored bumpers should be 2962442-3 inner, 2962446-7 outer.

This is what a couple other people told me. I haven't looked into it thoroughly myself yet. Hope that helps.

Does each part have a # stamped on it? (4 parts = inner & outer right, inner & outer left) The parts book may only list them together as an assembly the way they were sold?

They sound like elastomeric bumper brackets to me. Got a picture?

Another person told me the elastomeric bumper brackets are slotted for adjustment, but I'm not so sure that's true.

Tav
Posted By: 70mopes

Re: ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 08/04/09 02:34 AM

Post pictures of your elastomeric bumper brackets. Have never seen them before. would like to see what the dif is.
Posted By: cataclysm80

Re: ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 08/04/09 03:11 PM

I'd love to see a picture. In particular I'm wondering if the holes are slotted for adjustment.

I've been told the elastomeric bumper brackets move the bumper inward towards the car about 3/8 of an inch. Also, the elastomeric coating around the bumper core makes the bumper thicker than normal, which also makes the bumper appear closer to the car.

Tav
Posted By: TinCuda

Re: ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 10/14/11 01:57 PM

bump

I would like to see some pictures too


.,
Posted By: gtx6970

Re: ebody gurus 70-71 Cuda Front Bumper Bracket PN Question - 10/14/11 03:05 PM

This car is an original rubber bumper car.
I just ck'd and not have have any pictures of the bumper brackets.
But, I will have the car back in sometime in the next 4 to 6 weeks and can ck at that time.

Attached picture 6870793-6-26-1small.jpg
© 2024 Moparts Forums