Posted By: 05dakota
clips for 70 challenger hood molding? - 06/29/09 12:58 PM
where to get them?
clips for 70 challenger hood molding?
Posted By: FJ5_Fish
Re: clips for 70 challenger hood molding? - 06/29/09 01:06 PM
What style? They use 2 different types.
Posted By: 05dakota
Re: clips for 70 challenger hood molding? - 06/29/09 01:14 PM
they have a stud , an oval haed thats flat on one ege and has a wire/spring to hold in place.
Posted By: HEMICUDA
Re: clips for 70 challenger hood molding? - 06/29/09 05:31 PM
Posted By: gtx6970
Re: clips for 70 challenger hood molding? - 06/29/09 06:33 PM
Quote:
they have a stud , an oval haed thats flat on one ege and has a wire/spring to hold in place.
http://www.rtspecialties.net/proddetail.asp?prod=1000253
Posted By: 05dakota
Re: clips for 70 challenger hood molding? - 06/29/09 06:56 PM
thats them, thanks Bill.
Ted
Ted
Posted By: FJ5_Fish
Re: clips for 70 challenger hood molding? - 06/30/09 12:55 AM
Quote:
What style? They use 2 different types.
Sorry - I meant two different styles of nuts. I have seen the "pal" style nut and a nut with captive spin washer.
Posted By: Alaskan_TA
Re: clips for 70 challenger hood molding? - 06/30/09 12:59 AM
In addition to that, the studs for the N94 hood cars are longer, so there are two different lenths also.
Posted By: MCB Restorations
Re: clips for 70 challenger hood molding? - 06/30/09 11:59 AM
I have them in stock $14.00
Matt @ MCB www.tuffwheelrestoration.com
Matt @ MCB www.tuffwheelrestoration.com
Posted By: gtx6970
Re: clips for 70 challenger hood molding? - 06/30/09 12:14 PM
Quote:
In addition to that, the studs for the N94 hood cars are longer, so there are two different lenths also.
steel hood takes ?
glass hood takes ?
I've been doing some ck'ing and can get them in a 3/4" stud length. brings up the question - what are the lengths of each style ?
I know it's a 10-24 thread pitch
Posted By: cataclysm80
Re: clips for 70 challenger hood molding? - 06/30/09 12:25 PM
I've seen that length info with pictures here on moparts before. I think I saved it somewhere, but can't find it at the moment.
Tav
Tav
Posted By: m46rat
Re: clips for 70 challenger hood molding? - 06/30/09 02:03 PM
Actually, these are the correct ones, at least for 70 and 71 steel hoods. Can't comment on T/A hoods.
Posted By: gtx6970
Re: clips for 70 challenger hood molding? - 06/30/09 02:30 PM
I thought 71's attached to the hood from the bottom lip on the moulding ( 71 only ) instead of a clip inside the moulding as shown
Posted By: m46rat
Re: clips for 70 challenger hood molding? - 06/30/09 02:37 PM
They come both ways, with and without the lip. Yes, the ones with the lip would use screws attaching where the lip is, otherwise they use the ones I posted. The eight in the background are NOS, the one in the foreground is an original.
Posted By: cataclysm80
Re: clips for 70 challenger hood molding? - 06/30/09 05:05 PM
The TA molding retainers were like that, only a little longer.
Did the 71's with the lip for screws also use the clips in addition to the screws, or did it only use the screws?
Any idea which 71's got which molding? Is it an early vs. late thing, or just a different vendor, etc...
Tav
Did the 71's with the lip for screws also use the clips in addition to the screws, or did it only use the screws?
Any idea which 71's got which molding? Is it an early vs. late thing, or just a different vendor, etc...
Tav
Posted By: m46rat
Re: clips for 70 challenger hood molding? - 06/30/09 05:33 PM
Tav: The parts book shows both as a possibility, as far as which car got which ones, no idea.
Posted By: Furyman
Re: clips for 70 challenger hood molding? - 07/01/09 02:42 AM
The ones m46 posted are 6002170 which are used in other applications like 69 Dart.I still have some nos ones...maybe 6 or 7 sets.