picture of correct 68 Charger PDB MC w/lid please

Has someone got a picture of a correct master cylinder with lid for a 68 Charge 440 with PDB. THanks.

Sure, I have NOS ones for sale in the B body parts for sale section if anyone is looking.

I think I have a used core if you need one.

Shake. please show the back side (pushrod side) of it. does the piston stick out of the bore ? I have a new/reman (A1 Cardone) I bought years ago and just pulled out of the box to use. low and behold, the piston extends out of the bore ~ 3/16" I decided not to use it since it didn't seem right to me.
Oh, and it is the Hemi one (exits on the fender side)

Todd

My Cardone unit stuck out as well....fairly sure its normal

I see the brake lines exit on the right/passenger's side of the master cylinder like the '69 B-bodies is this the norm on all PDB master cylinders for '68/'69 and other models and model year Mopars???


MikeR

Yes all exit on engine side EXCEPT 426 Hemi engines which exit on the fender side

Thanks 6T9.... BTW, my 74 'Cuda exits on the drivers fenderwell side and is NOT a Hemi car. (which is also the same MC I used on the 66 Satellite since it's quite a bit slimmer than the 68-9 version)

So..... does anybody need a HEMI master cyl ??

Todd