Posted By: Dogpro
Fender alignment washer size - 12/30/20 11:18 PM
What is the diameter and thickness of the original fender alignment washers? I need to get some and I see several sizes and thicknesses. Thanks, Lou
Fender alignment washer size
Posted By: kentj340
Re: Fender alignment washer size - 01/01/21 07:46 AM
Two sizes came from the factory:
3/8" flat washer, 0.38" I.D. x 0.070" thk x 1-5/16" O.D., clear zinc plated
3/8" flat washer, 0.38" I.D. x 0.190" thk x 1-5/16" O.D., clear zinc plated
Similar sizes are available from AMKproducts.com > catalogs > PDF Bulk Fasteners > Washers, flat.
On page 173, part B-13740 is .38 x 1.12 x .07 tk in clear zinc (S8), 12 pieces, $4.
On page 174, part B-13014 is .40 x 1.25 x .19 tk in clear zinc (S8), 2 pieces, $4
$30 minimum order plus $10 shipping. Many of their bolts, machine screws, etc., carry Chrysler part numbers and are noted with a penta-star.
3/8" flat washer, 0.38" I.D. x 0.070" thk x 1-5/16" O.D., clear zinc plated
3/8" flat washer, 0.38" I.D. x 0.190" thk x 1-5/16" O.D., clear zinc plated
Similar sizes are available from AMKproducts.com > catalogs > PDF Bulk Fasteners > Washers, flat.
On page 173, part B-13740 is .38 x 1.12 x .07 tk in clear zinc (S8), 12 pieces, $4.
On page 174, part B-13014 is .40 x 1.25 x .19 tk in clear zinc (S8), 2 pieces, $4
$30 minimum order plus $10 shipping. Many of their bolts, machine screws, etc., carry Chrysler part numbers and are noted with a penta-star.
Posted By: Dogpro
Re: Fender alignment washer size - 01/02/21 02:07 PM
Thanks, just what I was looking for 