Where to get a horn button?

I need to get the horn button center for my Roadrunner. The wheel is the three spoke plastic with chrome half ring horn button. Has a padded vinyl center with no logo. Where can I get one new if possible? I need a black one. Thanks!

I don't know of anyone making those, but you may be in luck as one was just listed tonight in the 70 and back b body parts section here on Moparts for $25. Check it out.

No new spoke covers being reproduced for any of the Mopar wheels, only the center caps for the 68-70 woodgrain wheels and the rimblow wheels. We do have the new Road Runner center emblems and Dodge emblems if you need. They fit nearly all of the wheels from 68 to the mid 70's. Here's one in one of our new woodgrain wheel center caps.

When you're looking for the spoke covers, be sure to look for worn areas around the end of the spoke where your thumb would rub off the grain every time you blow the horn. Very common problem with any of the vinyl spoke covers. Also keep in mind that the 70 wheel has a different spoke cover than the 68-69 even though they look almost identical at first glance.

Dave

I don't need the chrome horn ring/spokes. I just need the center padded piece. Will that horn button you show fit my wheel or only woodgrain wheels? Thanks for the reply.

Quote:

---

I don't need the chrome horn ring/spokes. I just need the center padded piece. Will that horn button you show fit my wheel or only woodgrain wheels? Thanks for the reply.

---

That is for woodgrain only as is what he is talking about. Did you look in the parts section? The one listed is dark blue, but I wouldn't think twice about dying it black if SEM dye is used, you will never tell the difference and it won't fade or peal if applied correctly.