Would you get both of these? or just the 4" one

Posted By: 340SIX

Would you get both of these? or just the 4" one - 03/27/09 05:24 AM

http://cgi.ebay.com/ebaymotors/4-and-8-i...omotiveQ5fTools
Get both the 4 and 8 or just get the 4" smaller one?Thinking the 8" is over kill
http://cgi.ebay.com/Magnetic-Hole-Plug-W...1742.m153.l1262
Any other source for them?

Posted By: mr_belvedere

Re: Would you get both of these? or just the 4" one - 03/27/09 06:36 AM

Get them both Kevin, you can never have too many tools......

Posted By: 340SIX

Re: Would you get both of these? or just the 4" one - 03/27/09 06:48 AM

Quote:

Get them both Kevin, you can never have too many tools......

That would be all 3

the smaller hole filler "is a go", the 4" one , and the 8" one
I was thinking the 8" is so long it would not do well since most parts are curved some

Posted By: mr_belvedere

Re: Would you get both of these? or just the 4" one - 03/27/09 07:23 AM

Quote:

Quote:

Get them both Kevin, you can never have too many tools......

That would be all 3
the smaller hole filler "is a go", the 4" one , and the 8" one
I was thinking the 8" is so long it would not do well since most parts are curved some

True. But, in the rare occasion that you would weld something flatter, its extra mass could also act as even more of a heat sink to help prevent warpage.