71 Cuda rocker mld. ?

I had heard that a 71 Cuda and a 69 Camaro rocker mld. is the same.Any truth to this? Thanks in advance.

YES AND 69 DART ALSO. go to local chey dealer and get them cheap.

I don't think so...Classic/OER has (71 Cuda) them for $275, NOS usually fetch $300-$450

So you can buy the Camaro ones and try to explain them off as factory prototypes?, or pony up for repros/NOS

like I said go to local Chevy dealer and order them, not classics, if im not wrong the Chevy moldings that Dayclona used for visual effect are for a rally Camaro, but not sure exactly what those are , the standard Camero are the exact same as 71 Cuda.the only difference I believe were the clips if I remember correctly , been a few years since I have bought any.

The Camero that I built a few years ago looked to have the same one piece moldings. It was an R/S Z-28
Don't know if they are the same length.

The Camaro molding has a totally different contour, narrower and approx. 3/4" longer. I have a buddies 69 in the shop we are cut and buffing and comparing to an NOS 71 Cuda set.

There ya go. I just remember when doing this Camero how much they looked like Cuda ones but never compared them side by side.