six pac air filter lid interchange

I have a six pac air filter assembly (top ,bottom and oval element) and was wondering if the lid is the same as a 69 road runner air grabber 4bbl air filter lid. I like the look of the big oval air filter and want to put it on my challenger with a T/A hood. it is a single 4 bbl. im not sure that the stud holes in the six pac lid are in the same place as the air grabber lid, this way I can just get the single 4 base and use the top and filter. thanks

Stud holes look very different

https://www.ebay.com/itm/Air-Grabber-air...r-/163198671394

https://www.jegs.com/i/Mopar-Performance/312/P2946393/10002/-1

yeah they do six pac are all the way to one end....

six pack lid is all by itself.

single 4 barrel and hemi is the same lid

Then there's the wide lip T/A-AAR and '69-1/2 Six Pack/6BBL air filter cover versus the rolled lip (smaller) cover.

Correct.
I believe shaker hood e bodies use same lid

Incorrect info above. Shaker hood uses the smaller rolled lip lid, not the wide lip lid.