screen printing for original voltage regulators

I have the original VR for my 69 Charger, but the font had basically worn off so I had to repaint it. I hate to go buy a new VR just for the correct font, date code etc. Anyone out there selling a stencil or decal with the correct font/part number date code?

Thanks

ECS sells restored voltage regulators. Maybe they would rescreen yours?

http://www.ecsautomotive.com/productdesc.php?co=c&id=71

go here... http://www.ecsautomotive.com/products.php?co=c






you type faster than me Floyd!

Doesn't a 69 have the old mechanical regulators? I don't think ECS, according to their web site does those.

You could probably have a rubber stamp made to duplicate your original and then stamp the regulator yourself. I've had several stamps made up to duplicate fan and hose markings. It might be good to have a stamp in case your original craps out and needs to be replaced.

ECS did mine. You have to clean the cover up and have it in primer when you send it to them.

Contact Cuda Cody on E bodies.org.

https://www.e-bodies.org/resources/mopar-stamps-stencils-paint-ink-part-numbers/

He's a great guy. I'm sure he could help you out,

Performance Car Graphics is an option also.

Or you can purchase emulsion film and make your own silk screen, did mine for about $30 in material and have a ton of excess film and ink

You are correct. The 69 models had the mechanical regulators..