70-71- E-body dash wiring routing

lookin to see if anyone has a pic of the back of a dash, wiring routing for the bulk head wiring. thanks

Maybe a more specific request?, rallye dash?, gauge wiring? or just general lay out?...as I have quite a few diagrams, pics, factory prints, etc...

Mike

Just an example

That is awesome Dayclona, Ralley dash , general lay out, when I took this apart it was horrible, just lookin to make it easier on myself..

Here's a moparts pic that was from the old days...Passed around quite a bit..

I'll give you what I have as far as general layout on the dash/rallye cluster, wiper switch/column/etc, I could supply some wiring diagrams from the FSM if those are needed?

keep in mind some pics are 70 or 71, or 70/71 applications, some are Cuda or Challenger specific, FACTORY prints with the lower box designations B/BH/BS/BP designation are Cuda only, Challenger only are J/JH specific, F series is 70, G series is 71 specific when trying to identify your application

If you need a blow up of a specific area that you can't see, let me know


hope it helps
Mike

.

..

...

....

3spd stuff

,,,

......

Thank you both, should be at the wiring soon and those pics will work, thanks again

Ok , I have other questions, does anyone have pics of the interier, where the shaker switch and the road lamp switches are mounted, I'm trying to get this correct as the car was horrible thanks

Here's the dash frame pic...

thank you , anything on the road lamp switch

For now...

...here's more rallye dash also

I would just like a pic of the switch in the vehicle, for the road lamp, thanks

I'll just post pics of 70/71 RALLEY dash switches only

Mike

........

Thanks again , that should do it, getting ready to wire it in a couple days.
One more question , where does the relay bolt to? (found it...) opps

Alright wrapping this up ,I know I need to install diode yet, no problem there, I have a 2 wire plug connector for the headlight / key in buzzer, is this correct and do you have pics..

Here's the key-in buzzer and the 70 road lamp relay...

71 road lamp relay and wiring diagram...

I'm posting this for 70challengerse...Here's a pic of his 71 harness...At this point he's got the wiring routed correctly and has 3 connectors in question...I've tagged them for easy reference..

Connector 1 ???
Connector 2 is flagged on his harness as the diode connector...
Connector 3 should be the 71 stand alone headlight buzzer

He needs confirmation and any additional info for these..Thanks