Posted By: Anonymous
BRAKE LINES AND PORPORTIOING VALVES - 02/24/09 01:58 PM
My project is a 70 challenger ta, build date 4-7-70. Front disc, rear drums no porportioning valve or valves.On ordering new brake lines I was asked if I wanted the 1 block or 2 block porportioning valve set up. Which is corect for my car? Question 2, did this car use a brake booster? Any help appreciated. Thanks.
Posted By: 05dakota
Re: BRAKE LINES AND PORPORTIOING VALVES - 02/24/09 06:49 PM
i believe power brakes were required with disc.
Posted By: Anonymous
Re: BRAKE LINES AND PORPORTIOING VALVES - 02/24/09 07:21 PM
thanks
Posted By: RoadRunnerJD
Re: BRAKE LINES AND PORPORTIOING VALVES *DELETED* - 02/25/09 12:14 AM
Post deleted by RoadRunnerJD
Posted By: Snoopy
Re: BRAKE LINES AND PROPORTIONING VALVES - 02/25/09 01:02 AM
Yours should have the one piece brake line to the rear brakes. Check your components against this photo.
Top = 2 lines to the rear.
Bottom = 1 line to rear.
Posted By: Anonymous
Re: BRAKE LINES AND PROPORTIONING VALVES - 02/25/09 04:38 AM
SINCE I DO NOT HAVE ANY COMPONETS TO COMPARE AND MY CAR WAS BULIT AFTER JAN 1970 I WOULD USE THE COMBONATION VALVE. THANKS FOR THE INFO.