A 12 guys, how do these wires look ??

Not going for number's matching, just how the wires are routed. Take note of the use of 90's and 180's at the distributor cap. Can the coil wire be 90 degrees and work ok ? How about # 7, 90 or 180 ? Thanks a ton. We are making a lot of these sets, and no complaints yet.. Can't be perfect, just want to look semi-correct.. Thank you..

These wires are great! You need to pop the tags off after you install them to make them look more correct.

My only thoughts are that pre 1970, all of the distributor boots are 180's, except for number 8.(we think) We are not trying to be concourse, just give customers something that looks mostly correct but performs better than anything else available..Thanks for the feedback. We send them with the markers so customers know which lead goes where.. Thanks, Rick G

You might do better asking the question here !

This may help

What's the source of that picture of the original wires?

David Wise at the ICCA...lot's of reference pics on the website.

http://www.iccahome.org/

Quote:

---

This may help

---

Thanks, so 2 is a 90 also ?!?!. We knew 1-3-5-7-8 were 90's. What year did this configuration start ? 69 1/2 ? Nice info..TY