1970 AAR BRAKE BOOSTER/MASTER CYLINDER RESTO..

Hello everyone!


Im doing some resto on the master cylinder & brake booster. I want it to OE spec when finished..

NOW, is EVERYTHING black painted as an assembly? Asking because i have seen a few 340+6 cars with with chromate plated liď.. Also the "hoop" that holds the lid in place, is it black zinc or painted.

Just want to be sure before i start to paint.


THANKS
Nicklas

Yes with the gasket between them installed and the vacuum nipple with grommet installed as well. Or at least that is what my research has lead to.

Ok, yes i have heard it too.. if i hear nothing else i will go for that.

Does anyone know where to buy that straight nipple that comes out of the booster on the aar I see a lot out there but all on a 90 degree angle Thanks

Here ya go....
http://www.ebay.com/itm/CHECK-VALVE-BOOS...Y-/221655628568

The AAR / T/A booster valve is orange.

Thank you

C'mon Barry
The ad clearly states "YES... THIS IS THE CORRECT VALVE THAT DRAWS CROWDS AT CARLISLE AND THE NATIONALS"