VIN on Hemi's....??

What month & year did they start stamping VIN's on the hemi blocks...?? Were they done in sequence with the B & RB blocks also...??

Thanks....!!

It started in 1968 for Hemi's, ALL of 1968.

Was 1968 the VIN or VON? I know a friend had a numbers matching 68 Coronet with a 383 and it was the VON and that matched the fender tag. Had to have the broadcast sheet to match the VON to the VIN.

Always the VIN. Not looking at a red 68 Hemi Charger are you?

ME...no......just looking to I.D. a late 66 model block..... Thanks for the info.... I was thinking it went along with the B & RB's but was not 100% sure...

The VIN sequence # would be stamped on the top back of the block adjacent to the oil sender hole, right into raw cast iron, sometimes hard to read.

What is stamped on the upper I.D. Pad? Post a pic if you can

You may be thinking about the body stampings that were the SO number until 1969.

Which is a common reason for confusion, in 1968 the VIN sequence was on the engine and transmission but the Vehicle Order Number was stamped into the body. The later cars had the VIN Sequence in all locations.

Ah, didn't know that. Knew it was VIN's all around in 1969.