Posted By: kape1
Need help with some partnumbers, 71- Cuda vert. - 05/04/15 01:28 PM
What is the partnumbers for this moldings?
Thanks
Karl
Posted By: 750-h2
Re: Need help with some partnumbers, 71- Cuda vert. - 05/04/15 05:32 PM
According to Chrysler's 1970/71 parts book. 3419 814-5
Posted By: cudaized
Re: Need help with some partnumbers, 71- Cuda vert. - 05/07/15 02:16 AM
Do you need a different pair?
Posted By: kape1
Re: Need help with some partnumbers, 71- Cuda vert. - 05/09/15 09:25 AM
Yes Ola, my set needs new crome but it use to take long time to get them back so I would like to have another one to put on during the time. Do you have a set to sell me?
Thanks
Karl
Posted By: JEJJ
Re: Need help with some partnumbers, 71- Cuda vert. - 05/09/15 01:34 PM
Hi Karl,
If your arrow is pointing to the top mouldings that the convertible top latches against, those are not chromed but polished metal.
Posted By: DAYCLONA
Re: Need help with some partnumbers, 71- Cuda vert. - 05/09/15 07:51 PM
Hi Karl,
If your arrow is pointing to the top mouldings that the convertible top latches against, those are not chromed but polished metal.
Agreed, ALL the windshield trim (5 pcs), window and outer (4pcs) of convertible trim is all stainless, just remove/repair and polish it out, no chroming need...
Mike
Posted By: DeMopuar
Re: Need help with some partnumbers, 71- Cuda vert. - 05/10/15 03:02 AM
Any of the E body stainless convertible pieces are VERY difficult to find that are not smashed, dented, bent, twisted, or torn. If you can find the two large ones on the top that need no repair and don't have dents in them from hooking the convertible top header panel into the top of the windshield frame are worth at least $1,000 each...............don't ask me how I know..........these are extremely rare in excellent condition.
If you've never had to deal in the rare hard to find E body parts -- hang on..............
Posted By: 71vert340
Re: Need help with some partnumbers, 71- Cuda vert. - 05/10/15 05:36 AM
I bought a complete set at a wrecking yard in 1985 for $35. I bought a second set of the top pieces a couple of years after that for about the same price. They're not perfect but can be restored with polishing. I didn't think they were hard to get until a friend needed just the drivers side post trim - he'd been looking for a long time. Sold him a spare I had 20 years ago cheap. How times change.
Posted By: kape1
Re: Need help with some partnumbers, 71- Cuda vert. - 05/10/15 09:12 PM
Thanks! Then I think I can restore the ones I have.