'63 B-body 3-speed Hurst Shifter Boot

A friend is restoring a '63 Fury Max Wedge car; he has two shifter boots, one has a raised "H" embossed in the rubber and one is plain...which one is correct?

I would like to know this as well as I too am putting together a 63 maxie with a t85 3 spd trans? I have to go thru the many boxes I have for parts for this car and see what I have laying around.

Have never seen an original boot with a "H" on it.

my dads 65 coronet has an H on the boot And I know it is untouched original.

Hmmmmm. '63-'65 all have the same part number 2405496.

Here is a original from my 63. It might vary if you are talking the early round style handle or the later hurst handle.

top

The boot that I have looks just like the one GOLDENCOMANDO posted. Now where do we I find a repro or good used one?

#2405496 boot is 1963 (only) with the Borg Warner T-10 4-speed or T-85 3 speed. The slot for the handle is not centered in the boot, like #2405552, the 1964-65 non console boot. We have a repro of the 1964-5 boot: http://brewersperformance.com/proddetail.asp?prod=SB552 I have never seen a "H" on any factory boot.

Wayne

Anyone reproducing the correct 63 boot?

Not sure if these are any help? eBay seller moparholdingcompanyltd