Moparts

Is it possible to date code a cruise control servo?

Posted By: VA_Mopars

Is it possible to date code a cruise control servo? - 01/04/15 04:42 PM

I know the servo unit was a very consistent part through the late 70s, but is the best way to determine the proper date of part to see if would be appropriate for my 69 Charger?

Thanks,
Joe
Posted By: twodoorpost

Re: Is it possible to date code a cruise control servo? - 01/04/15 05:42 PM

The 1968-1969 servo is different than the 1970+ servo. The system that shut the speed control off when the brakes are applied were vacuum powered in 1968-1969 and in 1970 that was changed to an electric shut off system. That meant differences in the servo. The later electric shut off was much simpler and can be adapted to the 1969 and earlier cars. Here's a pic of an NOS servo with a 1969 date code.

Attached picture 8384892-datecode0.jpg
Posted By: twodoorpost

Re: Is it possible to date code a cruise control servo? - 01/04/15 05:43 PM

servo comparison pic

Attached picture 8384895-servocomparison.jpg
Posted By: VA_Mopars

Re: Is it possible to date code a cruise control servo? - 01/04/15 07:35 PM

Thanks for the detailed response. It was exactly what I needed.

Joe
Posted By: NANKET

Re: Is it possible to date code a cruise control servo? - 01/04/15 09:01 PM

Thanks for bringing this topic up.

Are there and dates or part numbers stamped into the parts?
Or were they just ink stamps?
Posted By: gtx6970

Re: Is it possible to date code a cruise control servo? - 01/04/15 09:56 PM

Quote:

Thanks for bringing this topic up.

Are there and dates or part numbers stamped into the parts?
Or were they just ink stamps?




Serve has an ink stamp date.....not aware of a date code on any other underhood parts
Posted By: twodoorpost

Re: Is it possible to date code a cruise control servo? - 01/04/15 10:23 PM

My experience is that there were many more servos without any date code than with.

Attached picture 8385226-servoinventory02.jpg
Posted By: NANKET

Re: Is it possible to date code a cruise control servo? - 01/04/15 10:25 PM




Serve has an ink stamp date.....not aware of a date code on any other underhood parts





Bill, I'm must not understand what you meant, I'm sure you have seen some of these underhood parts that are date stamped: (not counting part on the engine)

Starter relay, horns, date stamped with week and year
Original tank mounted (67 & up style) window washer pump/motor has a date on it
Master cylinder 1970 hemi/ and disc brake date stamped on side
Radiators stamped day/year on RH bracket
Hood latch and catch day/year
Wiper motor barell stamped day and year
K member and Rivets on control arms stamped day and year
Posted By: gtx6970

Re: Is it possible to date code a cruise control servo? - 01/04/15 10:32 PM

Quote:




Serve has an ink stamp date.....not aware of a date code on any other underhood parts





Bill, I'm must not understand what you meant, I'm sure you have seen some of these underhood parts that are date stamped: (not counting part on the engine)

Starter relay, horns, date stamped with week and year
Original tank mounted (67 & up style) window washer pump/motor has a date on it
Master cylinder 1970 hemi/ and disc brake date stamped on side
Radiators stamped day/year on RH bracket
Hood latch and catch day/year
Wiper motor barell stamped day and year
K member and Rivets on control arms stamped day and year




Question was asking about cruise control parts
© 2024 Moparts Forums