Posted By: AZ_A12_BEE
4 speed Shifter for my R/T questions - 11/15/14 05:46 AM
Is there a way to identify the shifter by the numbels on it? Also mine has a grease zerk fitting on it, is that stock or something added.
Quote:
Close up
Quote:
Look on the reverse levers for a number. That will tell you the application from Brewers site.
Quote:
Handle is correct but box is 73 & up.
Quote:
This box is identical to the 68-9 B Hurst box except for the grease fitting....
Quote:Quote:
This box is identical to the 68-9 B Hurst box except for the grease fitting....
I'd pretty much agree. I'd always thought that the decoding went as thus:
2336= '64-'65 A & B Body
6353= '68-'69 B Body and '68-up A body
7174= '70 only B Body
7180= '70-'74 E Body and '71-up B Body
Dan
Quote:
This box is identical to the 68-9 B Hurst box except for the grease fitting. Those were used in the later A/F cars and trucks/vans.
Quote:
No, it is factory install. Likely someone replaced a worn out box with a new one at some time.
Quote:
This box is identical to the 68-9 B Hurst box except for the grease fitting. Those were used in the later A/F cars and trucks/vans.