Repop/Repaired Dash VIN Tag

OK,here's my dilemma.My 70 Charger 500,I have the original dash VIN tag.However someone before me removed it from the dash frame and wasn't very nice about it.I've straightened it the best I can,but it still isn't that presentable.The car is being re-done very nice and I will have a tough time putting it on the car.What are my options here,does anyone re-do or repair these tags.I don't want this thread to turn into a slug fest,just helpfull replys.Thanks,John.

Use it as is

Of all the things that could be bought as a reproduction item for a Mopar, I would think this would be absolutely the last one anyone would consider.

Having a reproduction VIN tag would seem to be the worst of all worlds. Whatever the shape of the original it would seem to be far less of a bad can of worms than having a reproduction.

If the tag is tore I would get it back into the proper shape, and use either silver solder to fill holes or whatever body filler you feel comfortable in using -- even JB Weld works well for non stressed areas to get them looking good again.

I would definitely use the original -- just doctor it up.

Good luck!!!!!!!!!!!

Try www.datatags.com they've done VIN tags in the past for individuals, you'll need all your documentations up front, title, registration, possibly a buildsheet and or fender tag to provide absolute proof of the car/ownership/VIN verification

I would try a Trim repair specialist and have it repaired.