Posted By: 70_FY1_N96_BEEP
Step by step roof rail seal install 68-70 B-Body H/T - 09/08/14 07:13 PM
Purchased the Soffseal seals and would like good step by step instructions. The stainless mounting holes are slotted for future adjustments. Thanks for any help, I can't believe I could not find anything searching.
Posted By: MOPARMIKE69
Re: Step by step roof rail seal install 68-70 B-Body H/T - 09/08/14 09:24 PM
FSM (Factory Service Manual)
Posted By: 70_FY1_N96_BEEP
Re: Step by step roof rail seal install 68-70 B-Body H/T - 09/09/14 04:52 AM
Service manual has no step by step, just images. And these are aftermarket seals. Nice try.
Posted By: wesgtx440
Re: Step by step roof rail seal install 68-70 B-Body H/T - 09/09/14 06:48 AM
Pretty easy install really. Peel out the old one and install the new one. Put some weather strip adhesive at both ends as well as where it makes the sharp bend at the top of the vent window frame. There is also some seam sealer across the joint under the weather strip. Also if you took out the stainless channel piece, you can by repro foam seal or use camper seal available in roll form from any local hardware store. I have use it with good results.
Posted By: 70_FY1_N96_BEEP
Re: Step by step roof rail seal install 68-70 B-Body H/T - 09/09/14 03:10 PM
Oh please....why even bother with your generic reply. Car is coming along quite nicely, even with no help from you. Oh, I build aircraft by the way, have a nice day....
Posted By: 70_FY1_N96_BEEP
Re: Step by step roof rail seal install 68-70 B-Body H/T - 09/09/14 09:03 PM
Hardly stumped. You may go now. Are you two brothers?