Rear muffler mounting plates inside trunk--E-BODY

Hi everyone,


I would like to see if anyone have an original trunk area with the mounting plates in place for the rear muffler brackets.. Im intrested to see what kind of mounting screw there should be for the plates and the finish on them.. I understand the mounting plate itself should be zinc plated.

THANKS
Nicklas

According to the fastener guide, two different screws have been found in that location. Some were attached through the center hole in the bracket...others were attached through the corner hole.

#10-18 x .50" long pan head Phillips.(zinc)

Optional screw...#10-16 pan head Phillips head with loose captive washer. (Zinc)

Understood thanks.

Same as for the washer bottle..

I was thinking that or black zinc on the screws.